Portable AC Installation (2 AC)

About the service

Our Portable AC Installation for 2 AC units is for homes, offices, clinics, shops and PGs where you want two portable ACs set up correctly in one visit.

We handle placement, exhaust hose setup, window kit fitting and drainage arrangement for 0.75 ton, 1 ton, 1.5 ton and 2 ton portable ACs of any brand. The goal is simple. both units should actually cool the rooms properly, with hot air going outside and power usage staying safe.

Best for.

• Two bedrooms or bedroom plus hall

• Two office cabins or treatment rooms

• Re installation of 2 portable ACs after shifting

• Fixing old wrong setups that never cooled well

Our process

1. Room check and planning for both ACs
The technician checks for each unit.

• Approx room size and layout

• Available window or exhaust opening

• Power socket and MCB position

• Where you sit, sleep or work in that room

Then they decide the best practical position for each portable AC and how to route the exhaust and drain.

2. Unboxing and basic inspection
For new units. accessories, exhaust hose and window kit are checked. For old units. basic condition, filters and casing are inspected to ensure they are safe to run.

3. Exhaust hose and window kit installation . AC 1 and AC 2
For each portable AC, the technician.

• Connects the exhaust hose properly to the unit

• Fits the window kit or exhaust plate to the available window or opening

• Reduces gaps with basic sealing so.

  • Hot air goes fully out

  • Minimum hot air and dust come back in

Correct exhaust setup is critical for all sizes and especially for 1.5 ton and 2 ton units.

4. Drainage setup for both units
Depending on model.

• Tank type units. tank and float are checked, seated properly

• Continuous drain models. drain pipes are connected and routed to a safe outlet

This reduces chances of water leakage, tank overflow and floor mess when the ACs run for long hours.

5. Power and safety check
Both units are connected to suitable power sockets. The technician checks plug, visible wiring and MCB so you are not running two high load units on unsafe extensions or thin wiring.

6. Trial run and settings
Each portable AC is started in cooling mode. The technician checks.

• Airflow and cold air direction

• Hot air exhaust output at the vent

• Basic noise and vibration

• Drain or tank indicator

Then you get a quick demo for both units on modes, temperature setting, swing and timer, including practical tips per tonnage and room size.

What we need from you

• Both portable ACs placed so all sides are reachable

• Access to two windows or openings for exhaust

• Working power sockets and MCB access for both units

• Original exhaust hoses and window kits or compatible sets

• Your preference on which AC will run in which room

Why proper installation matters for 2 portable ACs

• Wrong exhaust routing sends hot air back inside, cancelling cooling

• Poor sealing at the windows makes 0.75 ton and 1 ton units almost useless in bigger rooms

• Incorrect placement and bad exhaust for 1.5 ton and 2 ton units leads to noise, overload and very little cooling

• Bad drain setup on any unit gives water leak and slippery floors

• A correct setup lets both portable ACs deliver maximum cooling for their rated tonnage and helps you use them smartly across rooms

Frequently asked questions

Q1. Does this include drilling a new exhaust hole in wall or glass
No. Standard installation uses existing windows or openings. Core cutting or glass work is extra and not part of this service.

Q2. What if one or both window kits are missing or broken
The technician can do basic adjustments or temporary sealing, but proper window kits should be replaced by you. Best cooling always needs a correct kit.

Q3. Is this valid for all portable AC brands
Yes. We support most common portable AC brands and models between 0.75 ton and 2 ton.

Q4. Will you tell if a room is too big for my portable AC
Yes. You will get realistic room size guidance for each AC so you know where 0.75 ton or 1 ton is enough and where 1.5 ton or 2 ton is needed.

Q5. Does this include repair or gas work
No. This service is only for installation and setup. If any AC has a fault, it is treated as repair with separate charges.