Portable AC Foam Jet Deep Cleaning

About the service

Our Portable AC Foam Jet Deep Cleaning service is designed for 0.75 . 1 ton and 1.5 . 2 ton portable ACs that are running but not cooling like before, smelling bad or blowing weak airflow.

Unlike basic cleaning where only filters are washed, this service uses AC safe foam chemicals and controlled water cleaning to clean the internal coil, blower path, filter area and drain system. This helps your portable AC cool faster, smell fresher and run more efficiently.

Recommended when you notice.

• Portable AC is not cooling as it used to

• Bad smell when you switch it on

• Very low airflow even at high fan speed

• High electricity bill for the same running hours

• Dust build up on grills and vents

Works for.

• 0.75 ton and 1 ton units in small rooms, cabins and bedrooms

• 1.5 ton and 2 ton units in halls, shop floors, clinics and offices

Our process

1. Pre cleaning inspection
The technician checks.

• Current cooling and airflow

• Basic noise and vibration

• Filter and grill dust level

• Drain tank or hose condition

This helps decide the right cleaning level and confirms the AC is safe to operate.

2. Power off and area protection
The portable AC is switched off and unplugged. The technician protects the nearby floor and wall with sheet or cover so dust and dirty water do not spoil the area.

3. Filter and intake cleaning
Washable filters and air intake grills are removed and cleaned thoroughly. This instantly improves airflow for both smaller 0.75 . 1 ton units and larger 1.5 . 2 ton units.

4. Coil and air path foam cleaning
Where model design allows, AC grade non corrosive foam cleaner is applied to the evaporator coil and internal air path. The foam breaks sticky dust, fungus and oily dirt. After dwell time, the area is rinsed using controlled water so dissolved dirt flows out safely.

5. Drain tray and water path cleaning
The drain tray, tank contact area and drain path are cleaned. This reduces fungus, slime and blockage, which are the main reasons for bad odour and frequent tank overflow or water leakage.

6. Outer body and outlet cleaning
The outer casing, control panel edges and air outlet louvers are wiped and cleaned. This improves hygiene and overall appearance, especially for units used in clinics, salons and showrooms.

7. Test run and performance check
The portable AC is plugged back in and run in cooling mode. The technician checks.

• Airflow and temperature drop

• Smell from outlet air

• Drain behaviour or tank indicator

• Basic noise and vibration

You get a simple summary of the improvement after cleaning.

What we need from you

• Portable AC placed where all sides are reasonably accessible

• Working power socket and safe access to plug

• Space around the unit to keep filters and parts while cleaning

• Access to water and a bucket nearby

• Basic information on where and how often you use the AC

Why choose foam jet deep cleaning for portable AC

• Cleans more than just filters. focuses on coil, air path and drain areas

• Helps 0.75 . 1 ton units cool small rooms faster with less strain

• Helps 1.5 . 2 ton units handle bigger spaces without overheating

• Reduces bad smell, fungus and hidden dust inside the machine

• Can improve cooling performance and power efficiency when dirt was blocking airflow

• Uses AC safe, non corrosive cleaners suitable for aluminium and plastic parts

Frequently asked questions

Q1. How often should I do foam jet deep cleaning for a portable AC
For normal home use. once a year before peak summer is usually enough.
For dusty environments, shops, clinics or long daily use. every 6 months is better.

Q2. Will deep cleaning solve low cooling completely
If low cooling is mainly due to dust, fungus and blocked airflow, then foam jet deep cleaning can make a big difference.
If cooling is poor because of low gas, weak compressor or PCB fault, cleaning will help airflow but full performance will need repair or gas work.

Q3. Is the foam chemical safe for my portable AC
Yes. We use AC safe foam designed for coils and internal parts, and it is rinsed properly so no harmful residue is left.

Q4. Is gas filling included in this service
No. This is a cleaning and maintenance service. If the technician suspects a gas or compressor issue, it is treated as a separate repair job.

Q5. Does tonnage make a difference to the process
The method is similar for 0.75 . 1 ton and 1.5 . 2 ton units. Larger units usually run longer. so deep cleaning is very important to maintain cooling and efficiency.