Floor Standing AC Foam Jet Deep Cleaning
Cassette AC foam jet deep cleaning for 0.75 . 1 ton and 1.5 . 2 ton units. Includes filter wash, internal coil and air path foam cleaning where accessible, drain tray cleaning, basic drain outlet clearing and performance check to improve cooling, airflow and odour.
- Earliest Appointment: Today or next business day
- Easy Reschedule: Free up to 2 hours before slot
About the Service
Our Floor Standing AC Foam Jet Deep Cleaning Service is specially designed for tower AC units used in commercial environments such as offices, showrooms, restaurants, gyms, salons, industrial areas, and large halls. Floor standing ACs accumulate heavy dust, dirt, grease, and pollutants because of high airflow and continuous usage, which reduces cooling efficiency and increases electricity consumption.
This service provides intensive internal cleaning using high-pressure foam jet technology to restore powerful cooling, improve air quality, eliminate bad odour, and enhance compressor performance.
It is far more effective than basic cleaning and ideal for ACs that haven’t been serviced for 3–6 months.
Ideal For
-
Reduced cooling or slow cooling
-
AC blowing warm or dusty air
-
High power consumption
-
Bad smell from AC
-
Dirt, dust, and fungus buildup on coils
-
Clogged blower and filters
-
Commercial ACs operating for long hours
-
Seasonal deep cleaning requirement
Our Process
1. Pre-Inspection of Floor Standing AC
Technicians inspect the entire unit:
-
Cooling coil condition
-
Dust and grease accumulation
-
Blower motor airflow
-
Filter condition
-
Water drainage line
-
Odour or bacterial buildup
Inspection helps plan the deep cleaning process safely for large tower ACs.
2. Power Shutdown & Safety Preparation
-
Power supply disconnected at MCB
-
Sensitive electrical components covered
-
Safety gear used
-
Cleaning area secured to avoid water spillage
3. Filter & Panel Cleaning
-
Front panel removed
-
Filters washed using jet spray
-
Heavy dust & debris removed
-
Panels sanitised
This restores airflow and prevents dust circulation.
4. Foam Jet Chemical Application
We apply industrial-grade AC foaming agents to:
-
Evaporator cooling coil
-
Blower fan
-
Condenser coil (if accessible)
-
Drain tray & channels
Foam breaks down:
-
Dirt & dust
-
Oil & grease
-
Bacteria & fungal layers
-
Odour-causing contaminants
5. High-Pressure Jet Cleaning
Using a controlled pressure jet wash, we clean:
-
Coils
-
Blower
-
Drain area
-
Internal frame
This removes deeply embedded dirt and restores cooling efficiency.
6. Drain Line Flush
-
Complete drainage cleaning
-
Water flow restored
-
Prevents leakage & overflowing issues
7. Drying & Reassembly
-
Components dried
-
Safety covers removed
-
Filters and panels reinstalled
-
Full system tested
8. Cooling Performance Check
-
Airflow test
-
Cooling temperature test
-
Noise check
-
Drainage test
-
Final quality check
Your floor standing AC becomes cleaner, healthier, and cooler.
What We Need From You
-
Access to indoor unit
-
Water source for jet cleaning
-
Space to perform washing
-
Working electrical connection
-
Nearby drainage point
Our Service Promise
-
100% deep cleaning with foam jet
-
Trained commercial AC technicians
-
Complete removal of dust, bacteria & odour
-
No mess – area left clean
-
Transparent pricing
-
Enhanced cooling performance guaranteed
Frequently asked questions
Q1. How often should floor standing ACs be deep cleaned?
Every 3–4 months for commercial usage and 6 months for normal usage.
Q2. Will cooling improve after foam jet cleaning?
Yes — cooling improves significantly as coils and blower become dust-free.
Q3. Do you clean both indoor and outdoor units?
Indoor tower unit is cleaned completely. Outdoor unit cleaning depends on accessibility.
Q4. Is the chemical safe?
We use non-corrosive AC-safe foam formulated for coil protection.
Q5. How long does deep cleaning take?
Typically 45–90 minutes, depending on dirt level and tonnage.
Be the first to review “Floor Standing AC Foam Jet Deep Cleaning”
Booking and Dispatch
- Appointments are offered for your area in {{territory_name}}.
- You will get a confirmed time window after technician assignment.
- Technician selection uses skills required for the service.
Arrival Window
- Standard arrival window is 60 to 90 minutes around your slot.
- Delays due to weather or traffic are communicated by SMS or call.
Reschedule or Cancel
- Free reschedule or cancel up to {{free_reschedule_window_hours}} hours before the slot.
- Inside the window or technician en route. a visit fee of ₹{{visit_fee}} applies.
Access and Safety
- Ensure power, water and safe access to indoor and outdoor units.
- Provide building permissions if needed. jobs needing special access equipment may be rebooked.
Pricing and Payments
- Fixed price services show the total for the stated scope. parts that are not included are extra.
- Time and Material services charge visit plus actual time and parts. an estimate is shared for approval if parts exceed ₹{{approval_threshold}}.
- Online and UPI and cards accepted on completion.
Service Warranty
- Workmanship warranty is {{warranty_days}} days from completion.
- If the same issue reappears within warranty. we re-visit at no charge and fix our workmanship.
Parts and Materials
- OEM parts carry the manufacturer warranty. labor to fit parts follows our workmanship warranty.
- Refrigerant and consumables are billed as used for T and M jobs.
Refunds
- Prepaid fixed jobs. full refund if canceled before the free window.
- If the technician is dispatched or work has started. the visit fee is deducted.
- No refunds after successful completion of the booked scope.
What is not covered
- Damage due to voltage fluctuation without stabilizer. water ingress. pest or physical abuse.
- Civil works. painting. concealed piping. false ceiling work. unless listed in the service.
- Drain choke caused by building plumbing beyond AC drain.
- Leaks from coils or piping that require replacement. unless you approve the paid repair.








Reviews
There are no reviews yet.