Portable AC Uninstallation (1 AC)

About the service

Our Portable AC Uninstallation for 1 AC unit is for customers who want to safely remove one portable AC from their home, office, clinic or shop.

This service covers 1 ton, 1.5 ton and 2 ton portable ACs of any brand. We safely shut down, disconnect and pack the unit so you can shift it, store it or replace it without damaging the AC, wiring or surrounding area.

Best for.

• Shifting to a new flat or office

• Removing a portable AC before renovation

• Replacing an old portable AC with a new model

• Clearing ACs from a rented property before handover

Our process

1. Pre uninstallation check
The technician checks.

• Portable AC tonnage and model

• Power plug and socket condition

• Exhaust hose and window kit setup

• Drain method. tank, hose or pump

This helps plan a clean and safe removal.

2. Power off and safety
The unit is switched off and unplugged. The technician makes sure there is no live power at the socket or extension board before touching anything.

3. Stopping operation and draining water
If the AC was recently used, the technician waits briefly, then.

• Switches off and unplugs

• Drains condensed water from the tank or drain hose

• Makes sure no water is left that can leak during movement

This is important for 1.5 ton and 2 ton units which usually collect more water during long runs.

4. Disconnecting exhaust hose and window kit
The exhaust hose is detached from the unit and from the window kit.
Window plate or kit is removed carefully so the window can be used normally again. Minor gaps may be closed roughly. full carpentry or glass work is not included.

5. Detaching drain pipe or pump line
If your portable AC uses a continuous drain pipe or pump line, it is disconnected and any remaining water is drained out safely so it does not spill during transport.

6. Cleaning area and moving the unit
The technician wipes any spilled water and basic dust around the AC area.
The portable AC is then moved to the place you indicate. for example, near the exit door or a storage corner.

Loose items like remote, hose, drain pipe and window kit are kept together with the unit so you do not lose parts during shifting.

What we need from you

• Clear access around the portable AC

• Working switch or MCB to cut power if needed

• Space to keep unit, hose and kit after removal

• If you are shifting, basic packing material or trolley if required

• Information if the unit has known damage, crack or heavy water leakage history

Our service promise

• Safe uninstallation for 1 ton, 1.5 ton and 2 ton portable ACs

• No rough pulling of cables or force on sockets

• Exhaust hose, window kit and drain parts disconnected properly

• Area left neat within reasonable limits after removal

• Clear separation between uninstallation service and any repair or civil work

Frequently asked questions

Q1. Is this service valid for all brands of portable AC
Yes. It covers most 1 ton, 1.5 ton and 2 ton portable ACs of common brands.

Q2. Will you reinstall the portable AC at a new location
No. This booking is only for uninstallation. For setup at the new place, you need to book Portable AC Installation separately.

Q3. Will you repair the window after removing the kit
The window kit and temporary sealing are removed and the area is left usable. Full carpentry, glass repair or permanent sealing is not part of this service.

Q4. What happens to the water inside the AC
The technician drains the tank or hose before moving the unit, to avoid spills during shifting.

Q5. How long does portable AC uninstallation take
Usually 20 to 40 minutes, depending on access, hose routing and drain setup.

Q6. Is gas handling required for portable AC uninstallation
No. In normal uninstallation, we do not open the refrigeration circuit. The gas remains sealed inside the unit.